Coiler offers a variety of both indoor and outdoor antennas to compliment our line of repeater solutions.
SUN-825-3 Indoor Omnidirectional Antenna The Coiler SUN-825-3
Indoor Antenna is an omnidirectional ceiling antenna
especially designed to maximize the effectiveness
of Coiler RF repeaters for in-building wireless
coverage. It is an ideal solution
for installation in larger areas.
Frequency Range
GSM 900 / DCS / PCS / UMTS
Gain
3dBi
Dimensions
Height: 80mm
Diameter: 165mm
Weight
400g
A-2
Indoor Patch Omnidirectional Antenna The Coiler A-2 indoor mobile antenna was designed for on-glass installation. The radiant element (patent pending) is made on PCB Micro strip technology that is protected by thermoplastic casing. The antenna is supplied with a piece of 3M VHB adhesive tape which can be detached and repositioned if required.
Frequency Range
GSM 900 / DCS / PCS / UMTS
Gain
2.15dBi
Dimensions
57mm x 77mm x 10mm
Weight
70g
A-8020 Outdoor / Indoor Panel
Antenna The Coiler A-8020 Panel Directional Antenna is designed for indoor or outdoor use and is protected by a thermoplastic UV-stabilized casing to get the best performance for long periods of time. It is supplied with a 30cm low loss cable, connector and a bracket for an easy installation on a pole.
Frequency Range
GSM 900 / DCS / PCS / UMTS
Gain
9dBi
Dimensions
154mm x 134mm x 46mm
Weight
400g
SO-918-2
Outdoor Omnidirectional Antenna The Coiler SO-918-2 Omnidirectional Outdoor Antenna is a versatile and lightweight antenna that can be installed quickly and easily in a variety of environments.
Frequency Range
GSM 900 / DCS / PCS / UMTS
Gain
2.15dBi
Height
325mm
Weight
345g
Isolation
Free Antennas For operators and system integrators who demand the absolute highest level of performance, Coiler offers its IFS antennas. The Coiler IFS antennas are directional antennas with high gain and a high front-to-back ratio that provides remarkable performance.
Installing an IFS antenna dramatically reduces the space required for sufficient isolation between the donor and service antennas. With an IFS antenna, a narrow Half Power Beamwidth (HPBW) provides improved directional functions and high side-lode beam suppression prevents feedback noise. When combined with a high performance repeater, the total cost of deployment of an IFS system is much lower than that of a traditional fiber optic or ICS repeater.
